SUPERFLIP BAR 'SAFETY JACKETS'
|
The safety jacket pad protects all the exposed edges of our Freeride Innovations Superflip billet bar clamp, helping to eliminate the risk of injury to the rider if they accidentally land on the bars or if the bars land on them. The pad itself is a totally separate unit that can be slid on and off the billet superflip clamp. To install the pad you first separate the riser clamp so you have the 2 pieces top and bottom, the same as if you were normally fitting the flip levers but then you slide the pad over the top clamp and into position, next you slide the entire pad and the top of the flip lever assembly onto the handlebars pushing the bars through the pre-cut 22mm hold in the pad, next slide the bottom of the clamp into the pad and tighten using the 2 x M8 clamp bolts, this design makes it impossible for the pad to come away from the clamp or the bars whilst riding. Made 1st from a piece of high density EVA closed cell foam which is shaped around the billet riser clamp and then covered in Hydro Turf and shaped. We are able to custom design the colour scheme to match your Superflip levers , ski or riding gear! £29.95 Per/Pair |